کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5456714 | 1514657 | 2017 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Indentation size effect on hardness in the body-centered cubic coarse-grained and nanocrystalline tantalum
ترجمه فارسی عنوان
اثر اندازه اندرکنندگی بر روی سختی در تانتالوم درشت محور مرکب و درشت نانوکریستال
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تانتالوم نانوکریستالیک، نانو انداختن، اثر اندازه اندرکنش، سختی حساسیت نرخ فشار،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
Indentation size effect (ISE) on the hardness in the nanocrystalline (NC) (~24Â nm) Ta and coarse-grained (CG) counterpart has been investigated by the nanoindentation tests at room temperature. The experimental results show that at shallow indentation depth ranging from 50Â nm to 200Â nm, the measured hardness is obviously smaller than the values predicted by the Nix-Gao model in the CG Ta, which is in contrast to the tendency in the NC Ta. At indentation depth less than 600Â nm, obvious ISE can be observed in the both of CG and NC Ta. When the indentation depth is larger than 600Â nm, the observed ISE in the CG Ta would gradually disappear in the NC Ta. Based on the deformation mechanism at different indentation depth, the density of geometrically necessary dislocations (GNDs) (ÏGâNC) and statistically stored dislocations (SSDs) (ÏSâNC) constructed by the Nix-Gao model are used to explain this phenomena.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 686, 16 February 2017, Pages 19-25
Journal: Materials Science and Engineering: A - Volume 686, 16 February 2017, Pages 19-25
نویسندگان
Jiangjiang Hu, Weiming Sun, Zhonghao Jiang, Wei Zhang, Jinwen Lu, Wangtu Huo, Yusheng Zhang, Pingxiang Zhang,