کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5466977 1398922 2017 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fabricating ceramic components with water dissolvable support structures by the Ceramic On-Demand Extrusion process
ترجمه فارسی عنوان
ساخت اجزای سرامیکی با ساختارهای مقاوم در برابر آب با استفاده از فرایند اکستروژن برپایی سرامیک
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
This paper describes a further development of the novel Ceramic On-Demand Extrusion (CODE) process, with focus on fabricating ceramic components that have external/internal features and cannot be fabricated without the use of support structures. The minimum angle of a wedge-shaped part that can be fabricated using Al2O3 (alumina) paste without a support structure is first determined. An inorganic sacrificial material, CaCO3 (calcium carbonate), is then identified for building support structures. After fabrication the green part is dried and then sintered. During sintering, the main material densifies, while the sacrificial material decomposes and is then dissolved in water or acid. Sample parts are fabricated and evaluated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 66, Issue 1, 2017, Pages 225-228
نویسندگان
, , , , , ,