کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5468061 | 1518928 | 2017 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructures and nano-mechanical properties of multilayer coatings prepared by plasma nitriding Cr-coated Al alloy
ترجمه فارسی عنوان
میکرو سازه ها و خواص نانو مکانیکی پوشش های چند لایه که توسط نیتروژن پلاسمای آلیاژ آلومینیوم پوشش داده شده با کروم تهیه می شود
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژ 2024، نیتروژن پلاسما، پوشش متقاطع، ریز ساختار، نانو انداختن،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سطوح، پوششها و فیلمها
چکیده انگلیسی
A novel surface treatment combined with depositing Cr films followed by plasma nitriding was carried out on the surface of the 2024 Al alloy. Nano-grained Cr films were firstly deposited on the substrate surface by using magnetron sputtering, then plasma nitrided at 490 °C for 8 h under a gas mixture of 25% N2+75% H2. Microstructures and mechanical properties of the as-obtained coatings were characterized by using X-ray photoelectron spectrometer (XPS), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and nanoindentation. Results showed that a nitride/aluminide multilayer coating was obtained due to N-Cr and Cr-Al diffusion reaction. The outside nitride layer consisted of mainly CrN with nano crystals. The inner aluminide layer was composed of Al4Cr with nano lath-shaped structure and Al18Cr2Mg3 with large rectangle crystals. The nitrided surface showed a remarkable increase in hardness (15.4 GPa) than that of the untreated Cr film (5.2 GPa). The high valves of H/E ratio (0.078) and H3/E2 ratio (0.094) indicated the better wear resistance and plastic deformation resistance for the nitride surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 142, August 2017, Pages 106-113
Journal: Vacuum - Volume 142, August 2017, Pages 106-113
نویسندگان
Fanyong Zhang, Mufu Yan, Jining He, Fuxing Yin,