کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5469443 1519248 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Material handling and registration for an additive manufacturing-based hybrid system
ترجمه فارسی عنوان
دست زدن به مواد و ثبت نام برای یک سیستم ترکیبی مبتنی بر تولید افزودنی
کلمات کلیدی
تولید افزودنی، تولید هیبرید، مدل سازی رسوب بافته شده، پلت فرم ساخت قابل حمل دست زدن به مواد، ثبت،
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی کنترل و سیستم های مهندسی
چکیده انگلیسی
The final functionality of parts produced by Additive Manufacturing (AM) can, in part, be improved by the inclusion of multi-material capabilities. The Multi3D Manufacturing System uses material extrusion printing (fused deposition modeling technology from Stratasys), solid conductor wire embedding, direct-write, component placement, and micromachining to enable the fabrication of multi-functional products. The material handling methodology, implemented by the Multi3D System, transports a workpiece between manufacturing stations via a six-axis robot, portable build platform, and a controlled temperature environment or chamber that travels to each manufacturing station. Also discussed in this work, is the investigation and improvement of registration parameters between the two material extrusion printers within this system. The registration was ultimately quantified to have minimal errors: 69 μm along the x-axis, 183 μm along the y-axis, and 215 μm along the z-axis. The fabrication of a multi-colored part demonstrated the automated transfer of the workpiece, which offers early promise for an automated solution for multi-material fabrication using commercially-available fused deposition modeling machines.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Systems - Volume 45, October 2017, Pages 17-27
نویسندگان
, , , , , , , ,