کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5476582 1521418 2017 19 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermoelectric performance optimization when considering engine power loss caused by back pressure applied to engine exhaust waste heat recovery
ترجمه فارسی عنوان
بهینه سازی عملکرد ترموالکتریک هنگامی که از دست دادن قدرت موتور ناشی از فشار برگشتی به موتور احتراق گرما در اگزوز موتور جلوگیری شود
کلمات کلیدی
موتور، مبدل اگزوز، فشار پشت، ژنراتور ترموالکتریک، قدرت خالص،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
چکیده انگلیسی
A numerical model of a thermoelectric generator (TEG) is developed using the finite element method, and the convective heat-transfer coefficient and back pressure are calculated. The effect of the back pressure on the engine power loss is analyzed at different rotating speeds using GT-POWER simulation software. The optimal thermoelectric performance is analyzed considering the maximum net power output as the optimization objective. Results show that the net power output of the TEG can be considerably higher than the engine-power loss by optimizing the dimensions of the exhaust exchanger. When the rotating speed changes, the optimal height changes slightly; however, the optimal length and width change considerably. Considering the average values of the optimal length and width, the percentage deviation in the net power (approximately 4.2%) is the lowest for the following optimal dimensions: height = 0.005 m, length = 0.68 m, and width = 0.76 m. Further, a design height of less than 0.015 m also is acceptable if the corresponding optimal length and width are chosen, as a relatively high output power can be obtained with dev<10%. In brief, a high net power can be achieved by optimizing the design of the exhaust exchanger, regardless of the change in the rotating speed of the engine.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy - Volume 133, 15 August 2017, Pages 584-592
نویسندگان
, ,