Ultra wideband, low-power, 3–5.6 GHz, CMOS voltage-controlled oscillator

In this paper, a low-power inductorless ultra wideband (UWB) CMOS voltage-controlled oscillator is designed in TSMC 0.18 μm CMOS technology as a part of a ultra wideband FM (UWBFM) transmitter. The VCO includes a current-controlled oscillator (CCO) which generates output frequencies between 1.5 and 2.8 GHz and a voltage-to-current (V-to-I) converter. A low-power frequency doubler based on a Gilbert cell, which operates in weak inversion, doubles the VCO tuning range achieving oscillation frequencies between 3 and 5.6 GHz. Thus, the well-known proportionality between the oscillation frequency and the bias tuning current in CCOs is avoided for the entire achieved tuning range, resulting in a lower power design. The employed architecture provides high suppression, over 45 dB, of the 1st and 3rd harmonics, while enabling high-frequency operation and conversion gain due to the unbalanced structure and the single-ended output. The current consumption is 5 mA at a supply voltage of 1.8 V. The VCO exhibits a phase noise of −80.56 dBc/Hz at 1 MHz frequency offset from the carrier and a very high ratio of tuning range (60.4%) over power consumption equal to 8.26 dB which is essential for a UWBFM transmitter.