Experimental determination of fatigue behavior of lead free solder joints in microelectronic packaging subjected to isothermal aging

The effects of aging on the cyclic shear stress–strain and fatigue behavior of lead-free solders have been explored experimentally and have been presented in this paper. An experimental procedure has been developed for preparing Iosipescu shear specimens of SAC105 (Sn–1.0Ag–0.5Cu) lead-free solder, and the resulting solder joint specimens have been subjected to cyclic shear stress/strain loading at different aging conditions. A combination of four-parameter hyperbolic tangent empirical models has been used for the empirical fit of the entire cyclic stress strain curve. The fatigue life data were then fit using popular empirical failure criteria such as the strain-based Coffin–Manson model and the energy-based Morrow model. Evolution of shear hysteresis loop of SAC 105 with aging has been studied. Degradation of isothermal fatigue life due to aging has also been studied in this paper. A comparison between uniaxial fatigue data and shear fatigue data is shown and a good qualitative agreement has been found. Subsequent microstructure analysis has also been presented in the paper in support of isothermal aging effects.