کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
55780 47063 2011 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optimal synthesis of micro/mesoporous beta zeolite from kaolin clay and catalytic performance for hydrodesulfurization of diesel
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی کاتالیزور
پیش نمایش صفحه اول مقاله
Optimal synthesis of micro/mesoporous beta zeolite from kaolin clay and catalytic performance for hydrodesulfurization of diesel
چکیده انگلیسی

To be used as the unique sources of silica and alumina, kaolin clay was pretreated by different kinds of acids including H2SO4, HCl and H3PO4. Through evaluating the synthesis factors of the kaolin clay pretreatment and the crystallization of beta zeolite systematically, the optimal conditions were obtained, i.e., using HCl concentrations of 8.2 mol/L to process kaolin clay at 96 °C for 3 h, and the optimal H2O/SiO2 of 3–4, TEAOH/SiO2 ratio of 0.06, Na2O/SiO2 ratio of 0.05 for crystallizing at 170 °C more than 16 h. The typical physico-chemical properties of samples were characterized by the techniques of XRD, N2-adsorption and FT-IR. The supported NiMo/Beta-Al2O3 series catalysts with different beta contents were prepared and evaluated in a fixed bed microreactor with FCC diesel. HDS results indicated that NiMo/Beta-Al2O3 series catalysts exhibited higher HDS activities compared with the conventional NiMo/Al2O3 catalysts, and S in the best product obtained over the catalyst with beta content of 32% was 8.4 μg g−1 which met the S regulation of ultra clean diesel in Euro-V specification. Combined with the sulfur distributions by GC–PFPD method, it could be found that the incorporation of acidic zeolite in the support could favor the deep removal of sulfur compounds.

High crytallinity of beta, as shown in the figure above, was in situ synthesized from kaolin clay as the unique sources of silica and alumina. NiMo/Beta-Al2O3 catalyst with beta content of 32 m% exhibited higher HDS activity (99.4%) compared with NiMo/Al2O3 (98.7%), and S in the best product was 8.4 μg g−1 which met Euro-V specification.Figure optionsDownload high-quality image (187 K)Download as PowerPoint slideHighlights
► High crytallinity of beta was in situ synthesized from kaolin clay.
► NiMo/Beta-Al2O3 catalyst exhibited higher HDS activities compared with NiMo/Al2O3.
► S in the best product was 8.4 μg g−1 which met Euro-V specification.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Catalysis Today - Volume 175, Issue 1, 25 October 2011, Pages 485–493
نویسندگان
, , , , , ,