کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
57467 | 47120 | 2007 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Hydrogen production by oxidative methanol reforming on Pd/ZnO: Catalyst preparation and supporting materials Hydrogen production by oxidative methanol reforming on Pd/ZnO: Catalyst preparation and supporting materials](/preview/png/57467.png)
Pd and Pd–Zn alloy were supported on various supporting materials using impregnation, co-precipitation and microemulsion methods, and their catalytic performances in oxidative methanol reforming (OMR) were investigated. Pd/ZnO exhibited much higher selectivity than either Pd/Al2O3 or Pd/ZrO2 in the OMR for hydrogen production. This was attributed to the presence of Pd–Zn alloy on the ZnO support. Elemental Pd on Al2O3 or ZrO2 promotes methanol decomposition reaction and increases CO formation. Using a microemulsion method, a highly selective Pd/ZnO can be obtained with much lower Pd loading than that in samples prepared by co-precipitation. Modification of Al2O3 with ZnO produced a ZnAl2O4 phase, which was found to be a good support for the Pd/ZnO catalyst. Highly active and selective Pd/ZnO/ZnAl2O4 catalysts for the OMR reaction, containing much lower Pd loadings have been developed by impregnation of the supports with an aqueous solution of Pd(NO3)2 + Zn(NO3)2.
Journal: Catalysis Today - Volume 129, Issues 3–4, 15 December 2007, Pages 287–292