کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
581626 | 1453159 | 2009 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of Al2O3 mole fraction and cooling method on vitrification of an artificial hazardous material. Part 1: Variation of crystalline phases and slag structures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
بهداشت و امنیت شیمی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Effect of Al2O3 mole fraction and cooling method on vitrification of an artificial hazardous material. Part 1: Variation of crystalline phases and slag structures Effect of Al2O3 mole fraction and cooling method on vitrification of an artificial hazardous material. Part 1: Variation of crystalline phases and slag structures](/preview/png/581626.png)
چکیده انگلیسی
This study investigated how Al ions affect slag structure. During vitrification, pure Al2O3, CaO, and SiO2 served as the encapsulation phases with the use of Al mol% as an operating parameter. All specimens with the same basicity (mass ratio of CaO to SiO2) of 2/3 were vitrified at 1400 °C and cooled by air cooling or water quenching. XRD was used to measure the volume fractions of crystalline and amorphous phases. In a non-Al environment, CaSiO3 was formed in air-cooled and water-quenched slags. With the addition of Al2O3, no crystalline phases were observed in water-quenched slags. With the increase of Al mol% in specimens, the Al ions in air-cooled slags initially acted as an intermediate linking one tetrahedron chain to another and reducing the amount of crystalline phase, then behaved as a network former making the slags amorphous, and finally replaced Si ions in silicate frames to generate a large amount of CaAl2Si2O8. Air cooling improved the formation of crystallize structures with more leachable metal ions. A highly crystallized Al-framed structure is not suitable for encapsulating hazardous metals in vitrified slags.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Hazardous Materials - Volume 169, Issues 1â3, 30 September 2009, Pages 626-634
Journal: Journal of Hazardous Materials - Volume 169, Issues 1â3, 30 September 2009, Pages 626-634
نویسندگان
Yi-Ming Kuo, Kuo-Lin Huang, Chih-Ta Wang, Jian-Wen Wang,