Investigation on the sonocatalytic degradation of parathion in the presence of nanometer rutile titanium dioxide (TiO2) catalyst

The nanometer rutile titanium dioxide (TiO2) powder was adopted to act as the sonocatalyst after treatment of high-temperature activation and the ultrasound of low power was used as an irradiation source to induce heat-treated TiO2 powder performing sonocatalytic degradation of parathion. Although there are many factors influencing sonocatalytic degradation of parathion, the experimental results demonstrate that the optimal degradation condition of parathion can be obtained when the experimental conditions such as initial concentration of 50 mg/L parathion, addition amount of 1000 mg/L nanometer rutile TiO2, ultrasonic of 30-50 kHz frequency and 50 W output power, acidity of pH 10.0 and temperature of 20 °C are adopted. The degradation ratio of parathion surpassed 90% within 120 min ultrasonic irradiation in these optimal experiment conditions. The total degradation process of parathion has been monitored by UV-vis spectra and ion chromatography. At last, the parathions in aqueous solution are completely degraded and become some simple inorganic ions such as NO3−, PO43−, SO42−, etc. In addition, the sonocatalytic activities of reused TiO2 catalysts were also studied and found to decline gradually along with the reused times. In this paper, the research on sonocatalytic degradation kinetics was also been performed and found to follow pseudo first-order reaction. All experiments indicated that the sonocatalytic method in the presence of nanometer rutile TiO2 powder was an advisable choice for the treatments of non- or low-transparent organic wastewaters in future.