Primary explosives: Electrostatic discharge initiation, additive effect and its relation to thermal and explosive characteristics

All explosives, under all conditions must be considered vulnerable to generation, accumulation and discharge of static charge. The low energy static hazards of the order as low as 2-3 mJ need to be guarded against in case of highly sensitive compounds namely primary explosives. The hazard is normally associated with manufacturing and filling operations due to discharge of static charge accumulated on a person supplying energy up to 20 mJ. To reduce the risk associated with static initiation hazard in the processing and handling of the explosives, the electrostatic sensitivity tests can provide an important input regarding electrostatic hazards. This paper presents electrostatic sensitivity data in terms of zero ignition probability data (ESE0) of some of the initiatory explosives such as nickel/cobalt hydrazinium nitrate, silver azide, lead azide and mercury salt of 5-nitro tetrazole. Similar data has also been presented for samples coated with polyvinyl pyrrolidone to study its effect on electrostatic sensitivity. The electrostatic spark sensitivity of some conventional and novel made to explain the increased spark sensitivity behavior on the basis of the possible primary explosives has been studied. The electrostatic spark sensitivity of primary explosives decreased in the order of AgN3 = NHN > PbN6 > MNT > CoHN > BNCP. A possible correlation of spark energy with approximation and assumption has been drawn with thermal, detonation and mechanical properties. The polyvinyl pyrrolidone coated samples followed the same order but interestingly with increased spark sensitivity. An attempt has been reasoning of dielectric nature of the materials or exothermic effects of decomposition products of PVP. The present work also reports the electrostatic spark sensitivity of cap compositions.