Large eddy simulation of methane–air deflagration in an obstructed chamber using different combustion models

In this paper, simulations of methane–air deflagration inside a semi-confined chamber with three solid obstacles have been carried out with large eddy simulation (LES) technique. Three sub-grid scale (SGS) combustion models, including power-law flame wrinkling model by Charlette et al., turbulent flame speed closure (TFC) model, and eddy dissipation model (EDM), are applied. All numerical results have been compared to literature experimental data. It is found that the power-law flame wrinkling model by Charlette et al. is able to better predict the generated pressure and other flame features, such as flame structure, position, speed and acceleration against measured data. Based on the power-law flame wrinkling model, the flame–vortex interaction during the deflagration progress is also investigated. The results obtained have demonstrated that higher turbulence levels, induced by obstacles, wrinkle the flame and then increase its surface area, the burning rates and the flame speed.

► Methane–air deflagration interacted with solid obstacles is modeled using LES approach.
► Three different sub-grid scale combustion models are applied.
► It is found that the power-law flame wrinkling model is able to better predict the pressure and flame features.
► Based on the power-law flame wrinkling model, the flame–vortex interaction during the deflagration progress is also investigated.