کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
586654 1453282 2007 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
New dust explosion venting design requirements for turbulent operating conditions
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی بهداشت و امنیت شیمی
پیش نمایش صفحه اول مقاله
New dust explosion venting design requirements for turbulent operating conditions
چکیده انگلیسی

The 2007 edition of the National Fire Protection Association Standard 68 for Explosion Protection by Deflagration Venting has a new provision to account for the turbulence level in combustible dust or powder processing equipment. This paper explains the development of this new provision for increased deflagration vent area requirements in highly turbulent combustible dust/powder processing equipment. The development includes a review of initial turbulence level effects on vented explosion pressures, and a review of turbulence levels measured in ASTM E1226 and ISO 6184/1 explosion test procedures to determine Kst. A review of operating conditions in some representative spray dryer plant equipment suggests that most equipment of this type probably do not have high enough air flows to require increased explosion vent areas due to turbulence, but some types of equipment with high tangential entrance air flows may well need larger vent areas.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Loss Prevention in the Process Industries - Volume 20, Issues 4–6, July–November 2007, Pages 530–535
نویسندگان
,