Inherent risk assessment methodology in preliminary design stage: A case study for toxic release

At preliminary design stage, process designers normally lack of information on the risk level from process plant. An inherently safer process plant could be designed if the information of risk levels could be known earlier at the preliminary design stage. If the risk level could be determined, there is a possibility to eliminate or reduce the risk by applying the well-known concept: inherent safety principle. This paper presents a technique to determine the risk levels at preliminary process design stage using a 2-region risk matrix concept. A model to calculate the severity and likelihood of a toxic release accident was developed in Microsoft Excel spreadsheet. This model is integrated with process design simulator, iCON to allow for data transfer during preliminary design stage. 2-region risk matrix is proposed and used to evaluate the acceptability of the inherent risk based on the severity and likelihood rating. If the inherent risk level is unacceptable, modification for improvement can be done using the inherent safety principles. A case study has been carried out to illustrate the benefit of applying this newly developed technique. It was successfully shown that an inherently safer plant could easily be designed by applying this technique.

Figure optionsDownload as PowerPoint slideHighlights
► Inherent risk assessment (IRA) provides an inherently safer process plant.
► IRA is implemented at preliminary design stage to avoid or minimize accidents.
► The risk of toxic released can be assessed using a 2-region risk matrix concept.
► Modification for inherently safer design is based on inherent safety principles.