Influence of TiN coating on the biocompatibility of medical NiTi alloy

The biocompatibility of TiN coated nickel–titanium shape memory alloy (NiTi-SMA) was evaluated to compare with that of the uncoated NiTi-SMA. Based on the orthodontic clinical application, the surface properties and biocompatibility were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), wettability test, mechanical test and in vitro tests including MTT, cell apoptosis and cell adhesion tests. It was observed that the bonding between the substrate and TiN coating is excellent. The roughness and wettability increased as for the TiN coating compared with the uncoated NiTi-SMA. MTT test showed no significant difference between the coated and uncoated NiTi-SMA, however the percentage of early cell apoptosis was significantly higher as for the uncoated NiTi alloy. SEM results showed that TiN coating could enhance the cell attachment, spreading and proliferation on NiTi-SMA. The results indicated that TiN coating bonded with the substrate well and could lead to a better biocompatibility.

Figure optionsDownload as PowerPoint slideHighlights
► Three-point bending test was used to imitate the deformation of archwires.
► The early apoptosis rates were significantly lower after TiN modification.
► Cell attachment, spreading and proliferation were apparently enhanced on TiN.