Thermo-responsive poly(N-isopropylacrylamide) grafted onto microtextured poly(dimethylsiloxane) for aligned cell sheet engineering

Poly(N-isopropylacrylamide) (PNIPAAm)-grafted poly(dimethylsiloxane) (PDMS) offers an inexpensive, biocompatible, oxygen permeable, and easily microtextured thermo-responsive substrate for producing cell sheets. This study introduces a method of grafting PNIPAAm onto microtextured PDMS that is suitable for generating aligned vascular smooth muscle cell (VSMC) sheets. We examined a wide range of processing parameters in order to identify the conditions that led to acceptable sheet growth and detachment behavior. Substrates grafted under these conditions produced confluent cell sheets that fully detached in less than 10 min after lowering the culture temperature from 37 °C to 20 °C. The grafted layer thickness was determined to be 496 ± 8 nm by atomic force microscopy. Surface characterization by Fourier transform infrared spectroscopy showed a relative grafting yield of 0.488 ± 0.10, defined as the ratio of the PNIPAAm 1647 cm−1 to the PDMS 2962 cm−1 absorbance peaks. The water contact angle of the substrates was shown to change from 89.6° to 101.0° at 20 °C and 37 °C, respectively. We also found that cell behavior on PNIPAAm-grafted PDMS was not directly related to surface wettability or relative grafting densities.

Figure optionsDownload as PowerPoint slideHighlights
► Photoinitated grafting of poly(N-isopropylacrylamide) onto flat PDMS.
► Substrate processing parameters readily transferred to microtextured PDMS.
► PNIPAAm-PDMS suitable for vascular smooth muscle cell sheet growth and release.
► Surface wettability and grafting density not directly correlated to cell response.