کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
614388 | 1454814 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Finite element analysis of the head-neck taper interface of modular hip prostheses
ترجمه فارسی عنوان
تجزیه و تحلیل عنصر محدودی از رابط سر و گردن از پروتز های مدونر لگن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
روش عنصر محدود فرتینگ، خوردگی تماس،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
The purpose of this paper was to identify which parameters influence the micromotion at the head-neck taper interface of modular hip prostheses. Finite element analysis was performed where 3D models of the head-neck taper interface were subjected to an assembly force, 3300Â N of compression, and 100Â N of tension. The micromotion increased as the head size, assembly force, and taper size increased. The micromotion also increased when a mixed alloy material combination (CoCr head and Ti6Al4V neck) was used instead of all CoCr alloy prosthesis and when the center of the femoral head was in a more superior position relative to the center of the neck taper.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 91, November 2015, Pages 206-213
Journal: Tribology International - Volume 91, November 2015, Pages 206-213
نویسندگان
R.M.R. Dyrkacz, J.M. Brandt, J.B. Morrison, S.T. O' Brien, O.A. Ojo, T.R. Turgeon, U.P. Wyss,