Influence of load on the tribological conditions in piston ring and cylinder liner contacts in a medium-speed diesel engine

The present work is an attempt to determine the oil film thickness in a medium-speed four-stroke diesel engine with a cylinder diameter of 200 mm. Experimental research on this topic was found necessary due to the limited amount of published information available with reference to engines of the present size. The experimental part of the study was carried out as firing engine tests, with an instrumented piston, equipped with telemetric data transmission, and an instrumented cylinder liner in a 6-in-line test engine. The study was carried out for different parts of the four-stroke working cycle and for different levels of engine power output. The results were compared with the results of computer simulations, carried out using a commercial software package. The conclusions of the study comprise aspects on the formation and development of the oil film between the rings and the liner under a set of load levels together with the periodical fluctuation during different strokes of the working cycle.