کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
616791 881525 2006 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Sliding wear transition for the CW614 brass alloy
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
Sliding wear transition for the CW614 brass alloy
چکیده انگلیسی

Dry sliding wear tests were performed on a CW614 brass alloy using a pin-on-ring configuration. Wear kinetics were measured within a load range of 20–80 N and sliding velocity ranging from 1 to 7 m/s. Chemical compositions, morphologies and microstructures of worn surfaces and wear debris were characterised by scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDS). Two main wear regimes have been observed: severe wear and mild wear. The results of wear tests and metallographic investigations on worn surfaces have been summarised in a wear mechanism map. It was found that the wear transition is controlled by a critical temperature at the contact surface.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 39, Issue 4, April 2006, Pages 290–296
نویسندگان
, , , , ,