Dynamic mathematical modeling of a novel dual-type industrial ethylene oxide (EO) reactor

In this paper, the dynamic behavior of a novel dual-type industrial ethylene oxide reactor has been proposed with taking catalyst deactivation into account. The configuration of two catalyst beds instead of one single catalyst bed is developed for conversion of ethylene to ethylene oxide. In the first reactor which is an industrial fixed-bed water-cooled reactor, the feed gas is partly converted to ethylene oxide. This reactor functions at very high yield and at a higher than normal operating temperature. In the second converter, the reaction heat is used to preheat the feed gas to the first reactor and a milder temperature profile is observed. The potential possibilities of a two-stage catalyst bed system are analyzed using a 1D heterogeneous dynamic model to obtain necessary comparative estimates. A differential evolution (DE) algorithm is applied as an effective and robust method to optimize the reactors length ratio. The results obtained from the simulation demonstrate that there is a desirable catalyst temperature profile along the dual-type reactor (DR) compared with the conventional single-type reactor (SR). In this way, the catalysts are exposed to less extreme temperatures and thus, diminishing the catalyst deactivation via sintering. Results from this study provided beneficial information about the effects of reactors configuration on catalyst lifetime and ethylene oxide production rate simultaneously.

► Dynamic behavior of a novel dual-type ethylene oxide reactor.
► Partial conversion of feed gas to ethylene oxide in first reactor.
► Using reaction heat in second reactor to preheat feed gas to the first reactor.
► A favorable catalyst temperature profile along the dual-type reactor.
► Enhancement in catalyst lifetime and ethylene oxide production rate.