Integration of immersed membrane ultrafiltration with the reuse of PAC and alum sludge (RPAS) process for drinking water treatment

Effects of PAC and alum sludge generated from water treatment process on the effluent quality and fouling of immersed UF membrane were systematically investigated with representative source of natural water and the efficiency of coagulation, PAC adsorption and RPAS to treat natural surface water prior to UF were compared. It was found that the average turbidity removal by RPAS could reach up to 80.2%, and the turbidity removal of immersed membrane UF was independent of the influent, which could be kept at 99%. Particulates were reduced after being pre-treated by different processes, and particles with sizes ranging from 0.5 to 3.5 μm and larger than 13.5 μm were effectively removed by RPAS. UF coupled with RPAS pre-treatment got the best removal for DOM compared to other processes with average DOC and UV254 removal 54.1% and 47.2% due to the high removal in the influent of UF. The residual alum content in the effluent of RPAS with UF was less than coagulation and bacteria were almost all removed by membrane. The membrane-fouling was mitigated by pre-treatment processes at different degrees, TMP of UF coupled with RPAS process was relatively stable in 15 d of run, the adsorption of PAC and large number of Al(OH)3 complexes and precipitates for the foulant molecules might be an important mechanism.