Effect of pre-treatment on fouling propensity of feed as depicted by the modified fouling index (MFI) and cross-flow sampler–modified fouling index (CFS–MFI)

The effectiveness of different pretreatment on the fouling propensity of the feed was studied using synthetic wastewater. The fouling potential of the feed was characterized by the standard modified fouling index (MFI) and cross-flow sampler modified fouling index (CFS–MFI). In CFS–MFI, a cross-flow sampler was used to simulate the condition of a cross-flow filtration. The results indicated that the pretreatment such as flocculation with an optimum dose of 68 mg/l FeCl3 substantially reduced the fouling propensity of the feed. The standard MFI of flocculated wastewater was reduced by around 99% compared to that of the untreated wastewater. Similarly, the adsorption with powdered activated carbon (PAC) of 1 g/l reduced the standard MFI value to more than 99% compared to that of the untreated wastewater. The CFS–MFI values were lower than the standard MFI values for both treated and untreated wastewater, suggesting that the standard MFI was overestimated. The overestimation of the standard MFI compared to that of the CFS–MFI value was more than 99%. The effect of molecular weight distribution (MWD) of the foulants in the wastewater on the fouling propensity of the feed was investigated. The MWD was correlated with the MFI and CFS–MFI indices. It yielded useful insights in understanding the effect of MW on MFI and CFS–MFI and fouling propensity of the feed.