کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
63205 | 47675 | 2007 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Cobalt-based catalysts supported on titania and zirconia for the oxidation of nitric oxide to nitrogen dioxide Cobalt-based catalysts supported on titania and zirconia for the oxidation of nitric oxide to nitrogen dioxide](/preview/png/63205.png)
Cobalt-based catalysts supported on TiO2 and ZrO2 were studied for the oxidation of NO to NO2 in excess oxygen. NO oxidation was studied as the first step in a two-step catalytic scheme where NO is oxidized to NO2 and in turn NO2 is reduced with CH4 to N2 under lean conditions. Catalysts were prepared by sol–gel (SG) and incipient-wetness impregnation (IWI) techniques and characterized by temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), laser Raman spectroscopy (LRS), and diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS). It was found the nature of the support, the synthesis technique, and the pretreatment conditions affect the catalytic activity. 10% Co/ZrO2 catalysts prepared by IWI were found to be most active among the catalysts tested, giving the highest NO uptake capacity and the highest turnover frequency (TOF) based on NO adsorption sites. Tests with bulk Co3O4 also showed significant NO oxidation activity.
Journal: Journal of Catalysis - Volume 247, Issue 2, 25 April 2007, Pages 356–367