کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
633336 | 1456029 | 2014 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microscopic studies on TiO2 fouling of MF/UF polyethersulfone membranes in a photocatalytic membrane reactor
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
تصفیه و جداسازی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The evaluation of the influence of photocatalyst (TiO2 P25) loading, feed cross-flow velocity (v), transmembrane pressure (TMP) and feed pH on the fouling phenomenon of polyethersulfone microfiltration (HFK618 - 0.1 μm) and ultrafiltration (UE10 - 10 kDa, UE50 - 100 kDa) membranes in a photocatalytic membrane reactor (PMR) is presented. Scanning electron microscopy, atomic force microscopy and laser scanning microscopy were applied for the observation of the fouling cake. The increase of the velocity v led to an increase of the permeate flux which was attributed to the formation of a thinner TiO2 layer. The permeate flux, the thickness and the roughness of the fouling layer depended on the TiO2 loading only at the first stage of the process. The increase of TMP resulted in a stronger flux decline caused by the increase of the fouling layer thickness. No permeate flux deterioration was observed in case of HFK618 and UE10 when TMP of 0.05-0.1 MPa was used. In case of UE50 exhibiting the highest pure water flux the fouling was the most severe. When the feed pH was changed to pH 3 or 9 the flux decline was much stronger than when no pH adjustment was done.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Membrane Science - Volume 470, 15 November 2014, Pages 356-368
Journal: Journal of Membrane Science - Volume 470, 15 November 2014, Pages 356-368
نویسندگان
Sylwia Mozia, Dominika Darowna, Aleksander Orecki, RafaÅ Wróbel, Katarzyna Wilpiszewska, Antoni W. Morawski,