کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
633837 | 1456049 | 2014 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface modification of thin film composite polyamide membrane using atomic layer deposition method
ترجمه فارسی عنوان
اصلاح سطح پلیمرید پلی آمید کامپوزیت نازک با استفاده از روش رسوب لایه اتمی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
تصفیه و جداسازی
چکیده انگلیسی
We present surface modification of thin-film-composite (TFC) polyamide (PA) reverse osmosis (RO) membrane by atomic layer deposition (ALD) process using trimethylaluminium (AlMe3). The aim of the inorganic ALD coating is to improve the anti-fouling performance of TFC PA membranes. The ALD processing parameters were systematically studied because of the lack of previous investigations of the ALD coated RO membranes. Two different processing temperatures (70 °C and 100 °C) and three different ALD cycles (10, 50 and 100) were used to deposit the Al2O3 ALD coatings on TFC PA membranes. The ALD process parameters affected on the hydrophilicity and the surface polarity as well as on the surface roughness of the coated membranes. The bacteria attachment test results indicated that the lowest number of Pseudomonas aeruginosa cells was adhered on the most hydrophilic and polar surface, among the ALD coated membranes. RO tests showed the effect of ALD coating on the water and salt permeability as well as on the salt rejection of the membranes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Membrane Science - Volume 450, 15 January 2014, Pages 174-180
Journal: Journal of Membrane Science - Volume 450, 15 January 2014, Pages 174-180
نویسندگان
Juha Nikkola, Jenni Sievänen, Mari Raulio, Jing Wei, Jyrki Vuorinen, Chuyang Y. Tang,