Pervaporation separation of aqueous chlorophenols by a novel polyurethane urea–poly (methyl methacrylate) interpenetrating network membrane

A novel polymer membrane system consisting of interpenetrating network (IPN) of hydroxy terminated polybutadiene (HTPB) based polyurethane urea (PUU)–poly (methyl methacrylate) (PMMA) has been designed and developed as highly permselective membrane for pervaporation separation of toxic p-chlorophenol and 2,4-dichlorophenol from their dilute aqueous solutions. It was observed that 3 ppm 2,4-dichlorophenol in water could be reduced to 0.3 ppm 2,4-dichlorophenol using a PUU–PMMA IPN membrane of ∼28 cm2 area and 150 μm thickness. This membrane has shown high selectivity towards p-chlorophenol and 2,4-dichlorophenol at very low concentration in feed. Feed concentration of p-chlorophenol was varied from 1000 to 7000 ppm and that of 2,4-dichlorophenol was varied from 3 to 4000 ppm. Fifty seven percent 2,4-dichlorophenol in permeate was obtained from 3 ppm concentration in feed compared to 87% 2,4-dichlorophenol in permeate from 1000 ppm in feed. Pervaporation studies were carried out by varying the temperature of feed, membrane thickness and PMMA content in the membrane. The results of this investigation have revealed that these membranes would be suitable for separation of chlorophenols from industrial effluents.