Optimization of extraction of luciferase from fireflies (Photinus pyralis) using aqueous two-phase extraction

• Conditions for luciferase extraction were optimized using statistical technique.
• Concentrations of PEG-1500 and (NH4)2SO4 along with pH were optimized.
• Graphical optimization techniques were used to obtain workable optimum conditions.
• Purification of 6.5-fold and activity recovery 70% was achieved.

A central composite rotatable design was employed to study the effect aqueous two-phase extraction conditions namely polyethylene glycol-1500 (PEG) concentration (12–16%), (NH4)2SO4 concentration (14–20%) and pH (6–9) on the extraction of luciferase from Photinus pyralis. Specific activity, activity recovery, purification fold, volume ratio, enzyme and protein partition coefficients were considered as response variables. The significant (p < 0.05) response surface models with high coefficients of determination values (R2) ranging from 0.89 to 0.95 were fitted for the experimental data, which indicated that the polynomial response models fitted well for describing the specific activity, activity recovery, purification fold, volume ratio, enzyme and protein partition coefficients. Based on the design, the optimal conditions were polyethylene glycol concentration 12%, (NH4)2SO4 concentration ranging from 16.48% to 17.86% and pH ranging from 8.17 to 8.43. The graphical optimization of superimposed contour plots fulfilled the conditions to obtain specific activity (Y1) ⩾ 5.5 × 106 RLU/mg, activity recovery (Y2) ⩾ 70%, purification fold (Y3) ⩾ 6.5, volume ratio (Y4) ⩽ 0.77, enzyme partition coefficient, Ke (Y5) ⩾ 95, protein partition coefficient, Kp (Y6) ⩽ 2.5. The study demonstrated that response surface methodology can be utilized for deriving the optimum conditions for optimizing the conditions for the aqueous two-phase extraction of luciferase.

Figure optionsDownload as PowerPoint slide