Balloon-borne measurement of the aerosol size distribution from an Icelandic flood basalt eruption

- Balloon flight results of a novel aerosol sizer through volcanic plume.
- Discussion of size distribution of fresh volcanic aerosols.
- Precise determination of plume altitude and structures.
- Comparison with IASI satellite datasets and ground scanning DOAS.
- Estimation of a ratio particles/SO2.

We present in situ balloon-borne measurements of aerosols in a volcanic plume made during the Holuhraun eruption (Iceland) in January 2015. The balloon flight intercepted a young plume at 8 km distance downwind from the crater, where the plume is ∼15 min of age. The balloon carried a novel miniature optical particle counter LOAC (Light Optical Aerosol Counter) which measures particle number concentration and size distribution in the plume, alongside a meteorological payload. We discuss the possibility of calculating particle flux by combining LOAC data with measurements of sulfur dioxide flux by ground-based UV spectrometer (DOAS).The balloon passed through the plume at altitude range of 2.0-3.1 km above sea level (a.s.l.). The plume top height was determined as 2.7-3.1 km a.s.l., which is in good agreement with data from Infrared Atmospheric Sounding Interferometer (IASI) satellite. Two distinct plume layers were detected, a non-condensed lower layer (300 m thickness) and a condensed upper layer (800 m thickness). The lower layer was characterized by a lognormal size distribution of fine particles (0.2 μm diameter) and a secondary, coarser mode (2.3 μm diameter), with a total particle number concentration of around 100 cm−3 in the 0.2-100 μm detection range. The upper layer was dominated by particle centered on 20 μm in diameter as well as containing a finer mode (2 μm diameter). The total particle number concentration in the upper plume layer was an order of magnitude higher than in the lower layer.We demonstrate that intercepting a volcanic plume with a meteorological balloon carrying LOAC is an efficient method to characterize volcanic aerosol properties. During future volcanic eruptions, balloon-borne measurements could be carried out easily and rapidly over a large spatial area in order to better characterize the evolution of the particle size distribution and particle number concentrations in a volcanic plume.