کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
651157 1457404 2016 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Multiple vortex structures in the wake of a rectangular winglet in ground effect
ترجمه فارسی عنوان
ساختارهای گرداب چندگانه در پی یک برند مستطیلی در اثر زمین
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی


• Unexpected secondary vortices produced behind Vortex Generators (VGs).
• Description of vortex topology: tip vortex, horseshoe vortex, lateral separation.
• Different stable far wake state topologies depending on VG geometry.
• Secondary structures affect VG performance compared to classical models.
• Coupling between streamwise velocity and vorticity across the entire wake.

Patterns of vorticity in the wake of a single rectangular winglet (vortex generator) embedded in a turbulent boundary layer have been studied using Stereoscopic Particle Image Velocimetry (SPIV). The winglet was mounted normally to a flat surface with an angle to the oncoming flow. A parametric study varying the winglet height (constant aspect ratio) and angle has shown, contrary to the common classical single tip-vortex conception, that the wake generally consists of a complex system of multiple vortex structures. The primary vortex has previously been discovered to contain a direct coupling between the axial and the rotational flow. In the current work, even the longitudinal secondary structures detected from measured streamwise vorticity display similar behavior. A regime map depicting the observed stable far wake states of the multiple vortices as a function of winglet height and angle reveals complex patterns of the flow topologies not only with the primary tip vortex, but with the additional secondary structures as well. A bifurcation diagram shows distinct regimes of the various secondary structures as well as how the primary vortex is in some cases significantly affected by their presence. These data should serve as inspiration in the process of generating longitudinal vortices for enhancement of heat and mass transfer in industrial devices since the multiple vortex regimes can help improve the conditions for these exchanges. Further, these results point to a weakness in existing inviscid models not accounting for the possibility of multiple vortical structures in the wake.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Experimental Thermal and Fluid Science - Volume 72, April 2016, Pages 31–39
نویسندگان
, , ,