کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
652399 | 885019 | 2007 | 14 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: The fluid dynamics of a miniature dilution tunnel for internal-combustion engine aerosol measurement The fluid dynamics of a miniature dilution tunnel for internal-combustion engine aerosol measurement](/preview/png/652399.png)
This paper investigates the fluid dynamics of a particular mini-dilution tunnel using LDV, flow visualization, a tracer sample technique and CFD. The mini-dilution tunnel studied had a 3.175 mm inside diameter tube discharging on the centerline of the tunnel where the diameter increases in a single step to 7.62 cm. The large diameter portion of the tunnel was 75 cm long. Most of the testing was performed at a flow rate of 15 l/min. The experimental investigation indicates that the flow field in the particular dilution tunnel tested has a persistent jet throughout its length, and this confined jet creates eddy recirculation zones which may cause the temperature and dilution histories of particles trapped in these eddies to be significantly different than particles which remain in the jet until extracted by the sample probe. Similarly, the location of the sample probe could also affect measured size distribution profiles, particularly if it were moved in or out of the path of the persistent jet. In addition to the simple tunnel geometry with a single abrupt expansion, a conical diffuser and a perforated plate were separately tested to investigate their effects on the tunnel fluid dynamics. The particular diffuser tested appeared to cause the jet to stall and therefore led to an even more unpredictable path for the fluid within. Limited testing with the perforated plate indicated that it increased the jet deceleration and laminarization, and therefore could lead to a more predictable flow path for aerosol sampled from the tunnel.
Journal: Experimental Thermal and Fluid Science - Volume 32, Issue 2, November 2007, Pages 475–488