Effects of blowing through a porous strip in a turbulent channel flow

An experimental investigation is performed on a fully developed turbulent channel flow with local injection through a porous strip. The Reynolds number based on the channel half-width was set to 5000. In addition to the no blowing case, measurements are made for three different blowing rates σ = 0.22, 0.36 and 0.58 (where σ is the ratio of momentum flux gain due to the blowing and momentum flux of the incoming channel flow). Measurements carried out with hot-wire anemometry reveal that injection strongly affects both the velocity profiles and the turbulence characteristics. The injection decreases the skin friction coefficient and increases all the Reynolds stresses downstream the blowing strip. The turbulence structure and the bursting phenomena were examined using space-time correlations measurements and conditional analysis. It is found that the injection increases the frequency of occurrence of the bursts.