کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6630072 | 1424930 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dynamic spray development of 2-methylfuran compared to ethanol and isooctane under ultra-high injection pressure
ترجمه فارسی عنوان
توسعه اسپری پویا 2-متیل بوران در مقایسه با اتانول و ایزو اکتان تحت فشار تزریق فوق العاده بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نزدیک نازل، شکستن اولیه، 2-متیل فوران، کاویتاسیون،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
چکیده انگلیسی
Understanding spray behaviors is key for the successful employment of high injection pressure systems and biofuels such as 2-methylfuran (MF) and ethanol (ETH) in modern direct-injection gasoline engines. In this present work, the MF spray characteristics in the near-field (up to 1.6â¯mm) and far-field (up to 48â¯mm) were experimentally investigated under ultra-high injection pressure of 30, 40 and 50â¯MPa compared to those of ETH and isooctane (ISO). The effects of injection pressure and fuel properties on the spray morphology, tip penetration and cone angle development have been analyzed. The results showed that MF had a unique spray tip structure with a bubble attached to a mushroom tip at 30 and 40â¯MPa. The formation of this mushroom tip and bubble was closely related and strongly influenced by the Weber number. Among the three fuels tested, MF presented the lowest spray tip velocity at both near-field and far-field due to its large density. Compared to ETH, MF and ISO always had wider macro cone angles due to their lower viscosity.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 234, 15 December 2018, Pages 581-591
Journal: Fuel - Volume 234, 15 December 2018, Pages 581-591
نویسندگان
Bo Wang, Yanfei Li, Yizhou Jiang, Hongming Xu, Xinyu Zhang,