کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6712837 1428727 2018 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Development of a three-dimensional diffusion model for water vapor diffusing into asphalt mixtures
ترجمه فارسی عنوان
توسعه یک مدل انتشار سه بعدی برای بخار آب پخش شده به مخلوط آسفالت
کلمات کلیدی
انتشار بخار آب، مخلوط آسفالت، مدل توزیع، نفوذپذیری، رطوبت نگهداری،
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
The developed model was applied to the data of Phase I water vapor diffusion tests performed on two types of asphalt mixtures at 20 °C using the Gravimetric Sorption Device. The initial relative humidity (RH) inside the test specimen was approximately 0% since the measuring cell where the specimen was placed was pre-vacuumed. The RH outside of the specimen was maintained at 51.51% throughout the test. The weight of the specimen was continuously measured to determine the mass of water molecules diffused into the specimen at different diffusion time points. The test data of every replicate specimen were fitted using the first 36 terms retained in the developed 3-D diffusion model in order to reduce computational efforts. A satisfied level of goodness of model fit was achieved with an R2 value larger than 0.97. The model parameters were determined during model fitting, including the diffusivities of the Phase I water vapor diffusion in asphalt mixtures and the moisture retention capability of each specimen per unit mass. These determined parameters of the hot mix asphalt specimens (HMA) were significantly larger than those of the fine aggregate mixture specimens, which should be attributed to the larger air void contents of the HMA specimens.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 179, 10 August 2018, Pages 526-536
نویسندگان
, ,