کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6715254 1428740 2018 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Crack growth modeling of tension lap spliced reinforced concrete beams strengthened with fibre reinforced polymer wrapping under fatigue loading
ترجمه فارسی عنوان
مدل سازی رشد کلاسیک از تیرهای بتونی تقویت شده با پوشش پلیمری تقویت شده پلیمر تحت بار خستگی
ترجمه چکیده
این مطالعه با هدف افزایش درک ما از رفتار پیوند بین یک نوار فولادی و بتن در امتداد یک منطقه پیوند لبه برای سازه های تحت بارگذاری چرخه ای بود. هدف دیگری از مطالعه این بود که بررسی تاثیر بار خستگی بر باند بین بتن و فولاد و توانایی صفحات پلیمری تقویت شده فیبر بالا و پایین مدول برای تقویت عملکرد خستگی از اتصال کششی تنش . مدل رشد ترکیب برای محاسبه عمر خستگی نمونه های باند ساخته شده است. نتایج مدل با نتایج آزمایش شده از پنجاه و سه پرتو تحت تست خستگی و بار تک توتون تست شده مقایسه شد. توافق خوب بین تعداد محاسبه شده از دوره و داده های عمر خستگی واقعی برای همه شرایط بسته بندی مختلف و ضخامت پوشش های مختلف بتن وجود دارد. تفاوت بین منحنی های استحکام خستگی محاسبه شده و اندازه گیری شده از 7 درصد تجاوز نمی کند.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
This study was aimed at increasing our understanding of the behavior of the bond between a steel bar and the concrete along a lap splice region for structures subjected to cyclic loading. An additional aim of the study was to investigate the effect of fatigue loading on the bond between concrete and steel, and the ability of the new high and low modulus fiber-reinforced polymer (FRP) sheets to enhance the fatigue performance of a tension lap splice. A crack growth model was developed to calculate the fatigue life of the bond specimens. The model results were compared with the experimental outcomes of fifty-three beams tested under fatigue and monotonic loading. There is a good agreement between the calculated number of cycles and the actual fatigue life data for all different wrapping conditions and different concrete cover thicknesses. The difference between the calculated and measured fatigue strength curves did not exceed seven percent.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 166, 30 March 2018, Pages 345-355
نویسندگان
, , ,