کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6725859 503610 2013 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Tensile behavior of post-installed chemical anchors embedded to low strength concrete
ترجمه فارسی عنوان
رفتار کششی از پیچک های شیمیایی پس از نصب که به بتن کم مقاومت تعبیه شده اند
کلمات کلیدی
پیچ های شیمیایی، رفتار محوری، ظرفیت کششی، عمق انطباق، فاصله لبه آزاد، بتن کم مقاومت،
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
In the scope of this paper, tensile capacities of post-installed chemical anchors embedded to 5.9 and 10.9 MPa concrete blocks are investigated. Pull-out tests are applied to 80 ductile steel bars (S420a). For the anchor diameters, 12, 16 and 20 mm are chosen. On the other hand, 10, 15 and 20 times the bar diameter are selected as free-edge distance and embedment depth for monotonic tensile loading tests. The results indicate that installation of anchors into low-strength concrete with sufficient embedment depth and free-edge distance is not unsafe as previously expected. To obtain ductile failure in low strength concrete, free-edge distance and embedment depth of minimum 15 times the anchor diameter should be required. Furthermore, a comparison of test results with ACI 318 capacities is done and it is observed that ACI 318 has quite an over-conservative approach for the tensile capacity of post-installed anchors when low-strength concrete is considered.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 47, October 2013, Pages 861-866
نویسندگان
, , ,