کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6725895 | 503610 | 2013 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Development of structural laminated veneer lumber from stress graded short-rotation hem-fir veneer
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Development of structural laminated veneer lumber from stress graded short-rotation hem-fir veneer Development of structural laminated veneer lumber from stress graded short-rotation hem-fir veneer](/preview/png/6725895.png)
چکیده انگلیسی
The key objective of this work was to investigate the feasibility of using short-rotation western hemlock (Tsuga heterophylla (Raf.) Sarg) and amabilis fir (Abies amabilis (Dougl.) Forbes) from coastal Britich Columbia, Canada for manufacturing structural laminated veneer lumber (LVL). Fourteen hem-fir logs were sampled, bucked and conditioned. Hem-fir veneer was then peeled, clipped, dried and visually graded. Combined hem-fir veneer was further segregated into three E grades based on dynamic modulus of elasticity (MOE). LVL billets were manufactured from each E grade and from two grade mixes, and evaluated for flatwise and edgewise bending MOE and modulus of rupture (MOR), and longitudinal shear strength. The results demonstrated that hem-fir veneer visual grade yield was about 15% B with the remainder C. No correlation existed between hem-fir veneer visual grades and E grades. Hem-fir LVL made from high E1 grade, medium E2 grade and low E3 grade could meet 2.2E, 1.8E and 1.5E product market requirements, respectively. Higher E grade veneer yielded higher LVL bending MOE, but not necessarily higher LVL shear strength. A good correlation was found between the LVL bending MOE and veneer mean MOE, and between the LVL bending MOR and MOE. Thus, the bending performance of the hem-fir LVL can be predicted based on veneer E grade and product lay-up. Pressing time changed clearly with the LVL lay-up with higher E grade requiring longer pressing time. Pressing time of mixed grade LVL fell within the times required for the two single grade lay-ups. Mixed grade LVL had a greater enhancement in flatwise than in edgewise, and was therefore more suitable for fabricating flanges of I-joists. Using a grade mix in the product lay-up allows low E grade veneer to be fully utilized for increased value recovery. The results of this study implied that without species segregation, the combined short-rotation hem-fir veneer can be successfully stress graded to manufacture structural LVL for building applications.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 47, October 2013, Pages 902-909
Journal: Construction and Building Materials - Volume 47, October 2013, Pages 902-909
نویسندگان
Brad Jianhe Wang, Chunping Dai,