Evaluation of getters for methane and ammonia decomposition

Getters are used in many tritium purification systems for impurity removal. One getter material, SAES® ST909, can be used to decompose various impurities (methane, carbon oxides, ammonia and others), and release the hydrogen bound in these compounds for further processing. Because, ST909 absorbs eight to nine percent of its initial weight in nitrogen, alternate materials may provide greater operational flexibility to accommodate variable operating carrier gases. The gettering capability of ST909 is related to the tri-metallic alloy (zirconium, manganese, and iron) composition. However, simply using a material with the same composition may not provide similar methane and ammonia decomposition conversion efficiency. For this testing, alternative materials to ST909 are compared to track methane and ammonia decomposition performance. Bench scale tests were performed at elevated temperature using various gas mixtures. Changes in methane and ammonia decomposition performance were tracked using RGA analysis during bench scale testing. Analytical comparisons of chemically equivalent materials to ST909 were also performed and correlated to bench scale test results. Characterization testing performed to evaluate chemically equivalent materials included: X-ray fluorescence, X-ray diffraction, and inductively coupled plasma-mass spectrometry (ICP-MS). Results are expounded upon and differences in gettering capability of alternate materials are highlighted.