Validation of TOKES vapor shield simulations against experiments in the 2MK-200 facility

Measurements of tungsten (W) plasma shield dynamics have been performed in the 2MK-200 facility under ITER relevant disruptive plasma heat flux densities of ∼100 GW/m2. Plasma temperature profiles at two time instants and time dependent electron density profiles are available from these experiments. These data have been used to validate TOKES code simulations of the W plasma shield which is computed to form in front of the ITER W divertor targets during disruptions. The experimental and simulated temperature profiles are in a good agreement for the measurement points at distances of 1-5 cm from the target. An important feature of the W plasma shield seen in the code simulations is the sharp electron temperature drop very close to the target. This region is not resolved in the 2MK-200 facility because of unacceptably low signal/noise ratio. Further experiments in a new, larger plasma gun are planned for experimental validation of this feature.