Using a geotextile with flocculated filter backwash water and its impact on aluminium concentrations

The use of geotextiles (i.e. geotextile tubes) in wastewater treatment applications is ever increasing. This paper examines the potential of using a geotextile to improve upon the treatment of aluminium present in a filter backwash water that is generated from a water treatment plant in Halifax, Canada. A field investigation to ascertain the distribution of aluminium in the filter backwash water treatment process is provided and compared to regulatory guidelines at the environmental compliance point. It is shown that aluminium is undergoing incomplete treatment at various times throughout the year. To examine a potential corrective action, the results of bench scale studies are presented in which cationic additives (i.e. CaO, MgO, and Fe3O4) are combined with a polymer to remove aluminium from solution and flocculate particulate matter from the filter backwash water. A geotextile is utilized to retain particulate matter generated from this process. It is shown that the combined use of the cationic additive with polymer can successfully reduce aluminium concentrations in the filter backwash water and that filtration via a geotextile can retain the aluminium particulate in the filter backwash water to levels close to regulatory requirements. Further optimization with the flocculation process is recommended prior to pilot testing.