کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6748343 1430169 2018 34 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Wrinkling of transversely loaded spinning membranes
ترجمه فارسی عنوان
چین و چروک غشاهای چرخشی عرضی
ترجمه چکیده
ساختارهای غشایی ریسندگی یک راه حل برای انعطاف پذیری فضایی بزرگ را فراهم می کنند. این مقاله یک مطالعه دقیق در مورد چروک شدن غشای دایره ای که توسط بارهای یکنواخت و عرضی انجام می شود، ارائه شده است. اندازه گیری های آزمایشی سرعت های زاویه ای که در آن غشاهای متفاوتی تبدیل به چین و چروک و تغییر حالت چروک که در هنگام چرخش غشا رخ می دهد ارائه شده است. فرمول نظری مشکل مطرح شده است که از آن جفت جابجایی سرعت های بحرانی بحرانی و بارهای بحرانی بحرانی تعیین می شود. یک جدول پایداری کلی ارائه شده است که محدودیت های پایداری را فقط از دو پارامتر بدون بعد برای هر غشا مشخص می کند. گذار بین رفتار تحت سلطه خمشی و رفتار غالب درون هواشناختی مشخص شده است و نشان داده شده است که در حالت غلبه بر غلظت، بار انتقالی غیرمستقیم بحرانی مستقل از سرعت زاویهای غیرمستقیم است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Spinning membrane structures provide a mass-efficient solution for large space apertures. This paper presents a detailed study of the wrinkling of spinning circular membranes loaded by transverse, uniform loads. Experimental measurements of the angular velocities at which different membranes become wrinkled, and of the wrinkling mode transitions that occur upon spin down of the membrane, are presented. A theoretical formulation of the problem is presented, from which pairs of critical angular velocities and critical transverse loads are determined. A general stability chart is presented, which identifies the stability limits in terms of only two dimensionless parameters, for any membrane. The transition between bending dominated behavior and in-plane dominated behavior is identified, and it is shown that in the bending-dominated case the critical non-dimensional transverse load is independent from the non-dimensional angular velocity.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Solids and Structures - Volumes 139–140, 15 May 2018, Pages 163-173
نویسندگان
, , , ,