کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6748489 1430175 2018 44 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The far-field deformation caused by a hydraulic fracture in an inhomogeneous elastic half-space
ترجمه فارسی عنوان
تغییر شکل دهی ناشی از شکستگی هیدرولیکی در نیمه فضایی ناهمگن ناپایدار است
ترجمه چکیده
در این مقاله، یک مدل مکانیکی ارائه شده و به مسئله محاسبه تغییر شکل دلفی و تنش های ناشی از شکست در یک مخزن با خواص مکانیکی متفاوتی نسبت به نیمه فشاری کششی همگن تقسیم می شود. شکست به عنوان یک اختلال جابجایی ثابت در سطح شکست مدل شده است و جریان مربوطه مربوط به شکست براساس هندسه شکست و مخزن تعیین شده است. اصطلاحات تحلیلی که موجب تحول در شکل دهی شده و تنش های حاصل شده با خواص هندسی و مکانیکی سیستم نامتقارن شده است، بر اساس روش ورودی معادل آن ایجاد شده است. مدل پیشنهادی روش ساده و محاسباتی کارآیی را برای تأثیر خواص مکانیکی غیرمجاز در تغییر شکل دهی تحریک کننده ناشی از شکست نشان می دهد که می تواند برای ترسیم نقشه کشی زمین از هندسه شکست استفاده شود. مدل مکانیکی با مقایسه نتایج عناصر محدود و راه حل های تحلیلی موجود در ادبیات تایید شده است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
In this paper, a mechanical model is presented and applied to the problem of calculating the far-field deformation and stresses induced by a fracture in a reservoir with mechanical properties different from those of the otherwise homogeneous elastic half-space. The fracture is modeled as a constant displacement discontinuity over the fracture plane, and the corresponding eigenstrain associated with the fracture is defined based on the geometries of the fracture and reservoir. Analytical expressions connecting the induced far-field deformation and stresses with the geometrical and mechanical properties of the inhomogeneous system have been established based on the equivalent inclusion method. The proposed model offers a simple and computationally efficient method to account for the effect of inhomogeneous mechanical properties on the far-field deformation induced by the fracture, which can then be used to undertake tiltmeter mapping of the fracture geometry. The mechanical model is verified by comparing with finite element results and analytical solutions available in the literature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Solids and Structures - Volumes 130–131, January 2018, Pages 220-231
نویسندگان
, , ,