Numerical solution of heat transfer process in a prismatic VHTR core accompanying bypass and cross flows

Bypass flow and cross flow gaps both exist in the core of a very high temperature gas-cooled reactor (VHTR), which is inevitable owing to tolerances in manufacturing, thermal expansion and irradiation shrinkage. The coolant mass flow rate distribution, temperature distribution, and hot spot temperature are significantly affected by bypass and cross flows. In the present study, three-dimensional CFD analysis is conducted for thermal analysis of the reactor core. A validation study for the turbulence model is performed by comparing the friction coefficient with published correlations. A sensitivity study of the near wall mesh is conducted to ensure mesh quality. Parametric studies are performed by changing the size of the bypass and cross gaps using a one-twelfth sector of a fuel block. Simulation results show the influence of the bypass gap size on temperature distribution and coolant mass flow rate distribution in the prismatic core. It is shown that the maximum fuel and coolant channel outlet temperatures increase with an increase in the gap size, which may lead to a structural risk to the fuel block. The cross flow is divided into two types: the cross flow from the bypass gap to the coolant channels and the cross flow from the high-pressure coolant channels to low-pressure coolant channels. These two types of flow have an opposing influence on the temperature gradient. It is found that the presence of the cross flow gaps may have a significant effect on the distribution of the coolant in the core due to flow mixing in the cross gaps.