کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
676017 | 1459631 | 2006 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermo-physical properties of epoxy nanocomposites reinforced by carbon nanotubes and vapor grown carbon fibers
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
HOPGVGCFphrDMACNTHR-TEMMWCNTSWCNTHigh resolution TEM - TEM با وضوح بالاTem - این استDynamic mechanical analysis - تجزیه و تحلیل مکانیکی پویاglass transition temperature - دمای انتقال شیشهChemical vapor deposition - رسوب بخار شیمیایی یا انباشت به روش تبخیر شیمیاییCVD - رسوب دهی شیمیایی بخار Sonication - سونیکیشن X-ray photoelectron spectroscopy - طیف سنجی فوتوالکتر اشعه ایکسXPS - طیف نگاری فوتوالکترونی اشعه ایکسVapor grown carbon fibers - فیبرهای کربنی با بخار رشد می کنندTransmission electron microscopy - میکروسکوپ الکترونی عبوریSingle wall carbon nanotubes - نانولوله های کربنی تک دیوارهMulti wall carbon nanotubes - نانولوله های کربنی چند دیواریCarbon nanotubes - نانولولههای کربنیEpoxy nanocomposites - نانوکامپوزیت اپوکسیHighly ordered pyrolytic graphite - گرافیت خالصی بسیار مرتب شده است
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this study, the thermo-physical properties of epoxy nanocomposites reinforced by fluorinated single wall carbon nanotubes (FSWCNT) and vapor grown carbon fibers (VGCF) were investigated. A sonication technique using a suspension of FSWCNT and VGCF in acetone was utilized to process nanocomposites in anhydride-cured epoxy. The viscoelastic properties of the nanocomposites were measured with dynamic mechanical analysis. The glass transition temperature decreased approximately 30 °C with an addition of 0.14 vol.% (0.2 wt.%) FSWCNT. The depression in Tg is attributed to non-stoichiometric balance of the epoxy matrix caused by the fluorine on single wall carbon nanotubes. The correct amount of the anhydride curing agent needed to achieve stoichiometry was experimentally determined by DMA measurements. After adjusting the amount of the anhydride curing agent for stoichiometry, the storage modulus of the epoxy at room temperature increased 0.63 GPa with the addition of only 0.21 vol.% (0.30 wt.%) of FSWCNT, a 20% improvement compared with the anhydride-cured neat epoxy. For VGCF, the storage modulus at room temperature increased 0.48 GPa with the addition of only 0.94 vol.% (1.5 wt.%) and then reached a plateau for larger amounts of VGCF. To understand the influence of VGCF on thermo-physical properties, the microstructure of the nanocomposites was interrogated using transmission electron microscopy (TEM). This study discusses the chemical effects of fluorine on matrix properties and the effect of stoichiometric balance on the thermo-physical properties of nanocomposites.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thermochimica Acta - Volume 442, Issues 1â2, 15 March 2006, Pages 67-73
Journal: Thermochimica Acta - Volume 442, Issues 1â2, 15 March 2006, Pages 67-73
نویسندگان
Hiroaki Miyagawa, Michael J. Rich, Lawrence T. Drzal,