کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
687362 | 1460128 | 2009 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Quantifying damage around grain boundaries in microwave treated ores
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
تکنولوژی و شیمی فرآیندی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Thermally induced damage due to microwave heating of mineral ore particles was simulated numerically using a continuum approach. Particles were represented as dispersions of microwave-absorbing grains in a non-absorbing matrix. As the aim of microwave treatment of ores is liberation of the absorbing grains from the matrix rather than bulk damage to the particle, damage was quantified by comparing the tensile stress in the zones surrounding the absorbing grains with the tensile strength of the matrix. Through comparison of two different ores it was shown that the most energy-efficient method of maximising grain boundary damage is by increasing the microwave power density and decreasing the treatment time. The amount of damage incurred at a specific power density and energy input was dependent on the ore mineralogy and its texture. More grain boundary damage was induced in coarser textured ores for the same energy input and damage was maximised for ores with microwave-absorbing grains with a large thermal expansion coefficient.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering and Processing: Process Intensification - Volume 48, Issues 11â12, November 2009, Pages 1566-1573
Journal: Chemical Engineering and Processing: Process Intensification - Volume 48, Issues 11â12, November 2009, Pages 1566-1573
نویسندگان
A.Y. Ali, S.M. Bradshaw,