کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6888303 1444921 2018 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Improving the durability of the optical fiber sensor based on strain transfer analysis
ترجمه فارسی عنوان
بهبود دوام حسگر فیبر نوری بر اساس تحلیل انتقال فشار
ترجمه چکیده
برای تحقق یافتن کشف قابل اعتماد و درازمدت کشش، دوام حسگرهای فیبر نوری توجه بیشتری به خود جلب کرده است. تکنیک بسته بندی به عنوان یک روش موثر در نظر گرفته شده است که می تواند نسبت های پایداری سنسورهای فیبر نوری را برای مقاومت در برابر ساخت و ساز و خدمت سخت در مهندسی عمران افزایش دهد. برای کنترل کرنش داخلی ساختارها، نصب جاسازی شده به کار می رود. با توجه به خواص مواد مختلف بین مواد میزبان و لایه محافظ، ساختار مانیتور شده با سنسورها می تواند به عنوان یک مدل معمول شامل موارد استفاده شده در نظر گرفته شود. مشخصه رابط بین سنسور و مواد میزبان، بدیهی است که وجود دارد، و رابط تماس مستعد ابتلا به شکست ناشی از تنش برشی بین فازی است. برای شناسایی آسیب های عقب نشینی بین فضایی محلی و گسترش چرخه عمر موثر سنسور جاسازی شده، تحلیل انتقال فشار از یک مدل حساسیت سه لایه عمومی برای بررسی مکانیسم شکست انجام شده است. اختلال حسگر تعبیه شده در زمینه کرنش محلی مواد میزبان مورد بحث قرار گرفته است. بر اساس تجزیه و تحلیل نظری، توزیع تنش برشی بین فاز در طول طول سنجش مشخص و برای تشخیص واکنش بین فضایی محلی مورد استفاده قرار می گیرد و پارامترهای حساس تحت تاثیر تنش برشی بین فازی نیز مورد بررسی قرار می گیرند. این تحقیق در این مقاله به بررسی مکانیزم شکست ناپذیری واکنش بین دیافراگم سنسور های تعبیه شده بر اساس تجزیه و تحلیل انتقال فشار می پردازد و مبانی نظری را برای افزایش خواص پیوند بین فازیکی و بهبود دوام حسگرهای فیبر نوری جاسازی شده فراهم می کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر شبکه های کامپیوتری و ارتباطات
چکیده انگلیسی
To realize the reliable and long-term strain detection, the durability of optical fiber sensors has attracted more and more attention. The packaging technique has been considered as an effective method, which can enhance the survival ratios of optical fiber sensors to resist the harsh construction and service environment in civil engineering. To monitor the internal strain of structures, the embedded installation is adopted. Due to the different material properties between host material and the protective layer, the monitored structure embedded with sensors can be regarded as a typical model containing inclusions. Interfacial characteristic between the sensor and host material exists obviously, and the contacted interface is prone to debonding failure induced by the large interfacial shear stress. To recognize the local interfacial debonding damage and extend the effective life cycle of the embedded sensor, strain transfer analysis of a general three-layered sensing model is conducted to investigate the failure mechanism. The perturbation of the embedded sensor on the local strain field of host material is discussed. Based on the theoretical analysis, the distribution of the interfacial shear stress along the sensing length is characterized and adopted for the diagnosis of local interfacial debonding, and the sensitive parameters influencing the interfacial shear stress are also investigated. The research in this paper explores the interfacial debonding failure mechanism of embedded sensors based on the strain transfer analysis and provides theoretical basis for enhancing the interfacial bonding properties and improving the durability of embedded optical fiber sensors.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optical Fiber Technology - Volume 42, May 2018, Pages 97-104
نویسندگان
, , ,