کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
689061 889588 2012 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fault diagnosis and accommodation of nonlinear systems based on multiple-model adaptive unscented Kalman filter and switched MPC and H-infinity loop-shaping controller
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی تکنولوژی و شیمی فرآیندی
پیش نمایش صفحه اول مقاله
Fault diagnosis and accommodation of nonlinear systems based on multiple-model adaptive unscented Kalman filter and switched MPC and H-infinity loop-shaping controller
چکیده انگلیسی

In this paper, a new active fault tolerant control (AFTC) methodology is proposed based on a state estimation scheme for fault detection and identification (FDI) to deal with the potential problems due to possible fault scenarios. A bank of adaptive unscented Kalman filters (AUKFs) is used as a core of FDI module. The AUKF approach alleviates the inflexibility of the conventional UKF due to constant covariance set up, leading to probable divergence. A fuzzy-based decision making (FDM) algorithm is introduced to diagnose sensor and/or actuator faults. The proposed FDI approach is utilized to recursively correct the measurement vector and the model used for both state estimation and output prediction in a model predictive control (MPC) formulation. Robustness of the proposed FTC system, H∞ optimal robust controller and MPC are combined via a fuzzy switch that is used for switching between MPC and robust controller such that FTC system is able to maintain the offset free behavior in the face of abrupt changes in model parameters and unmeasured disturbances. This methodology is applied on benchmark three-tank system; the proposed FTC approach facilitates recovery of the closed loop performance after the faults have been isolated leading to an offset free behavior in the presence of sensor/actuator faults that can be either abrupt or drift change in biases. Analysis of the simulation results reveals that the proposed approach provides an effective method for treating faults (biases/drifts in sensors/actuators, changes in model parameters and unmeasured disturbances) under the unified framework of robust fault tolerant control.


► A new active fault tolerant control (AFTC) methodology is proposed.
► A switched H∞ and MPC controller is used for uncertain nonlinear systems.
► The proposed approach provides an effective method for treating faults (biases/drifts in sensors/actuators, changes in model parameters and unmeasured disturbances) under the unified framework of robust fault tolerant control.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Process Control - Volume 22, Issue 3, March 2012, Pages 626–634
نویسندگان
, ,