|کد مقاله||کد نشریه||سال انتشار||مقاله انگلیسی||ترجمه فارسی||نسخه تمام متن|
|690172||1460408||2016||5 صفحه PDF||سفارش دهید||دانلود رایگان|
• Metals of iron ore tailing supported catalysts were prepared by impregnation approach.
• Fe2O3 exhibits the high catalytic activity for formaldehyde.
• Tailing powder of iron ore presents a good capacity of catalytic oxidation for formaldehyde.
Raw powder of iron ore tailing, the catalyst prepared by impregnation approach and the modified catalyst loaded Ag+ were investigated for catalytic oxidation of formaldehyde. Prepared materials were characterized by XRD, XRF and BET surface area. Experiments of catalytic activity were carried out in an electrically heated fixed-bed reactor in which 1.0 g of catalyst mixed fully with 10 g quartz sand was added. 200 ppm of formaldehyde gas was introduced into the reactor at a space velocity of 30,000 ml/g·h. Effects of reaction temperature and calcination temperature were considered. The results show that formaldehyde catalytic efficiencies of all materials increase with the increase of reaction temperature. Furthermore, the catalytic efficiency was enhanced when Ag+ loaded on the support. Physical properties of raw powder are unsatisfied, but 67% of formaldehyde catalytic efficiency was obtained at the reaction temperature of 100 °C which is far higher than that of other prepared catalysts.
Catalytic efficiencies of catalysts C1, C3 and C5.Figure optionsDownload as PowerPoint slide
Journal: Journal of the Taiwan Institute of Chemical Engineers - Volume 66, September 2016, Pages 217–221