کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
690423 1460411 2016 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Adsorption of methylene blue onto oil palm (Elaeis guineensis) leaves: Process optimization, isotherm, kinetics and thermodynamic studies
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی تکنولوژی و شیمی فرآیندی
پیش نمایش صفحه اول مقاله
Adsorption of methylene blue onto oil palm (Elaeis guineensis) leaves: Process optimization, isotherm, kinetics and thermodynamic studies
چکیده انگلیسی


• A new low-cost adsorbent was developed from oil palm leaves (OPL).
• Optimized condition for methylene blue (MB) removal was determined using RSM.
• The percentage of MB removal could reach 88.72% under the optimum conditions.
• Adsorption occurs through the bonding of OPL functional groups with MB.

In this study, the potential of oil palm (Elaeis guineensis) leaves (OPL) to remove methylene blue (MB) from aqueous solution was investigated. The adsorption of MB onto OPL was optimized using response surface methodology (RSM) based on a four-variable face-centered central composite design (FCCCD) to determine the effect of adsorbent dosage (0.25–2.5 g/L), initial pH (2–8), initial MB concentration (50–400 mg/L) and temperature (30–70 °C) on the adsorption process. The optimum conditions for the adsorption system were found as follows: adsorbent dosage of 2.22 g/L, initial pH of 6, initial MB concentration of 259 mg/L and temperature of 53 °C; with MB removal of 88.72%. The experimental data best fits the Freundlich isotherm model and followed the pseudo-second-order kinetic model. At temperature range of 30–55 °C, the adsorption process was found to be endothermic with increase in degree of spontaneity as the temperature increases. The characterization results revealed that the porous surface structure and functional groups of OPL play an important role in the adsorption of MB onto OPL.

Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the Taiwan Institute of Chemical Engineers - Volume 63, June 2016, Pages 363–370
نویسندگان
, , , ,