کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
691928 | 1460456 | 2010 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Textural characteristics of activated carbon by single step CO2 activation from coconut shells Textural characteristics of activated carbon by single step CO2 activation from coconut shells](/preview/png/691928.png)
The use of coconut shells as feedstock for the preparation of activated carbons is well adopted industrially, using conventionally two stage activation process, either using steam or CO2 as the activating agent. The present study attempts to utilize a one-step CO2 activation to prepare activated carbon from coconut shell, which has received far less scientific attention. Experimental results show that activation temperature, CO2 flow-rate, holding time and heating rates have significant effects on BET surface area, micropore volume and pore size distribution (PSD). The optimum conditions for activation have been found to be an activation temperature of 900 °C, a CO2 flow-rate of 200 cm3/min, a holding time of 140 min, and a heating rate of 10 °C/min. The optimum conditions yielded an activated carbon with a BET surface areas of 1667 m2/g and micropore volume of 0.8949 cm3/g, which are significantly higher than the activated carbon produced either using two stage activation process or one-step steam/CO2 activation for other precursors.
Journal: Journal of the Taiwan Institute of Chemical Engineers - Volume 41, Issue 3, May 2010, Pages 367–372